Ask most multi-site businesses how many air conditioning units they have, and you will get a number. Ask where that number came from, and the answer is usually a spreadsheet that was put together years ago, topped up by contractors and site teams, and never checked against what is actually on the walls and roofs. An inaccurate air conditioning asset register is easy to live with until you need it: to budget for replacements, to plan for peak season, or to show that your F-Gas records are in order.
Why AC asset registers drift out of date
Registers rarely start wrong. They go wrong over time, for ordinary reasons:
- Several contractors, several formats: different maintenance providers, installers and landlords each keep their own records, and nobody owns the full picture.
- Changes that never get logged: a unit is replaced after a breakdown, a store is refitted, or a system is added for a new server cupboard, and the register is not updated.
- Missing detail: a line that says “split system, back office” tells you nothing about the model, age, refrigerant or charge.
- Sites joining and leaving: acquisitions, disposals and lease changes add and remove kit faster than records keep up.
- No condition data: even an accurate list of units says nothing about which ones are likely to fail next.
None of this is anyone’s fault. It is what happens when records are spread across many hands and many sites.
Why it matters
You cannot budget for what you cannot see
Planned replacement depends on knowing what you have and what condition it is in. Without that, the only signal that a unit needs replacing is that it has stopped working, usually at the busiest time of year. We covered this in more detail in last week’s post on reactive versus planned budgeting.
Peak-season risk
If you do not know which sites have older or poorly performing equipment, you cannot target them before trading peaks. Breakdowns then turn into lost trading, uncomfortable customers and staff, and emergency call-outs.
F-Gas record-keeping
Under the GB F-Gas Regulations, the operator of the equipment (normally the business that has control over it, not the contractor) is responsible for keeping the right records. For systems that require leak checks, which depends on the type and charge of refrigerant measured in tonnes of CO2 equivalent, records typically need to cover:
- the type and quantity of refrigerant in each system
- the dates and results of leak checks
- any refrigerant added or recovered, and why
- repairs carried out and who carried them out
Records should be kept for at least five years. If your register does not reliably show the refrigerant and charge for each unit, it is hard to know which systems need leak checks and how often, and hard to evidence compliance if asked. Our compliance services page sets out how we support clients with F-Gas obligations. As always, check current requirements for your own equipment, as the rules are reviewed from time to time.
Refrigerant planning
Knowing which refrigerant each system uses also helps with longer-term planning, as supply and cost of some refrigerants change over time. That is only possible if the register records it unit by unit.
What a reliable register should hold
At a minimum, every indoor and outdoor unit should have its own line, with the following:
| Field | Why it matters |
|---|---|
| Site and location | So engineers can find it and you can see risk by site |
| Make, model and serial number | Parts, warranty and identifying the exact unit |
| Manufacture date | Replacement planning alongside condition |
| Unit type | Understanding the system and what replacement involves |
| Refrigerant and charge | F-Gas leak-check requirements and refrigerant planning |
| Condition grade and notes | Prioritising spend on the units most at risk |
How a survey rebuilds the register
The quickest way to get an accurate register is to go and look. On an AC Health & Condition Survey, our engineers visit every site and log every indoor and outdoor unit: make, model, serial number, manufacture date, unit type, refrigerant and charge. Each unit is graded from 1 (Poor) to 5 (New), with condition notes and any critical parts needed.
To give a sense of scale: in summer 2026 we surveyed the entire UK estate of a national retailer, covering 67 sites in 51 days. That meant 970 units inspected, recorded and graded, all brought together in an estate-wide summary with a site-by-site register. Because condition was recorded alongside the asset data, the client could also see that 70% of the problem units were at just 9 of the 67 sites, which is the kind of insight a list of units on its own cannot give you.
The client receives an individual report for every site, the estate summary and register, a prioritised Now / Next 12 months / Ongoing plan, and costed remedial quotes site by site. The reports can be used with any contractor, so the register stays yours.
Keeping it accurate afterwards
A register is only useful if it stays current. Once the baseline is in place:
- Update it every time a unit is installed, replaced or removed.
- Record leak checks, top-ups and repairs against the specific unit.
- Review flagged units at each planned visit, as part of a structured commercial air conditioning maintenance programme.
- Give one person or team ownership of the master record, whoever carries out the work.
Request a Survey Proposal
AKS has 34+ years’ experience, is a Daikin and Mitsubishi partner and covers the whole UK. Survey visits are scheduled around your trading hours and are non-intrusive. If you are not confident your air conditioning asset register is right, call us on 01704 833 755 or request a survey proposal online. You can find full details on the AC Health & Condition Survey page.