If you run air conditioning across ten, fifty or a hundred sites, the worst time to find out which units are failing is during your busiest trading weeks. A single dead unit in a shop, a warm stockroom or an overheating comms room costs you sales, stock or staff productivity at exactly the moment you can least afford it. Peak season does not create these failures, but it exposes them.
This air conditioning checklist for facilities managers is designed for multi-site estates. It covers what to check, what to ask your contractor, and how to prioritise when you cannot visit everything yourself.
Start with what you actually know
Before you plan any work, test how reliable your own information is. Most estates carry some gaps, and gaps are where surprises come from.
- Do you have a complete list of units at every site? Indoor and outdoor, including the ones installed by a previous tenant or an earlier contractor.
- Do you know the make, model, serial number and refrigerant for each? Without these, parts ordering and F-Gas record-keeping both get harder.
- Do you know the condition of each unit? Not whether it was working last time someone looked, but how close it is to needing repair or replacement.
- Do you know which sites matter most to trading? A failure at a flagship store or a distribution hub is not the same as one in a rarely used office.
If the answer to any of these is “not really”, that is your first priority. It is also what an AC Health & Condition Survey is built to fix across the whole estate in one programme.
The pre-peak checklist
1. Confirm your planned maintenance is actually up to date
Check the last service date for every site, not just the ones you remember. Missed visits are common in larger estates, particularly where sites changed hands or contractors changed. Our commercial air conditioning maintenance work is built around keeping a clear schedule so nothing slips through.
2. Review recent call-outs and repeat faults
Pull the last twelve months of reactive jobs. Look for the same site, the same unit or the same fault appearing more than once. Repeat faults are usually a sign of something that repair alone will not fix.
3. Check the basics at every site
- Filters clean and condensate drains clear
- Outdoor units free from debris, vegetation and blocked airflow
- Controllers and schedules set correctly for current trading hours
- Any alarms, error codes or unusual noise already logged by site staff
4. Identify critical-parts risks
Some faults are easy to fix on the day. Others need a part that takes time to arrive. Knowing in advance which units are likely to need critical parts lets you order early instead of waiting for a failure.
5. Agree a response plan for peak weeks
Confirm who site staff call, what response times apply and who approves emergency spend. A plan that exists only in someone’s head will not work at 8am on a busy Saturday.
Where the risk really sits
Facilities teams often assume problems are spread evenly across the estate. Our experience says otherwise. In a summer 2026 survey of a national retailer’s entire UK estate, we inspected and graded 970 units across 67 sites in 51 days. Of the units graded poor or below average, 70% were at just 9 of the 67 sites. Thirty sites had at least one poor or below-average unit, while 37 had none.
| Survey result (anonymised retail estate) | Figure |
|---|---|
| Sites surveyed | 67 in 51 days |
| Units inspected and graded | 970 |
| Units poor or below average | 160 (107 poor, 53 below average) |
| Share of problem units at 9 sites | 70% |
| Units recommended for full replacement | 83 across 13 sites |
The practical point is that a blanket approach wastes effort. Knowing which sites carry the risk lets you focus inspection, spend and contractor time where it counts.
Turn the checklist into a plan
A checklist tells you what to look at. A survey tells you what you have. The AC Health & Condition Survey grades every unit from 1 (poor) to 5 (new), then gives you a prioritised plan:
- Now: urgent replacements that should happen before peak trading.
- Next 12 months: at-risk kit to budget for.
- Ongoing: flagged units to monitor at planned maintenance visits.
You receive a health check report for each site, an estate-wide summary with a site-by-site register, and costed remedial quotes. Visits are arranged around trading hours and are non-intrusive, and the reports can be used with any contractor. For estates facing F-Gas record-keeping duties, the unit-level data is a useful foundation as well.
Timing matters
The earlier you survey, the more options you have. Replacements can be scheduled and budgeted instead of forced by a breakdown, and your maintenance contractor can focus on the right units. With 34+ years’ experience, Daikin and Mitsubishi partnerships and UK-wide coverage, AKS can survey estates of any size.
Request a Survey Proposal
If you want to know where your estate stands before the next peak, call us on 01704 833 755 or request a survey proposal online. Tell us how many sites you manage and when your busiest period starts, and we will outline how a survey would work for you. You can read more on the AC Health & Condition Survey page.