What a 67-Site Air Conditioning Survey Taught Us About Estate Risk

If you run air conditioning across a lot of sites, you probably know roughly which units give you trouble. What most estate owners do not have is a complete, graded picture of every unit, and that gap is where peak-season breakdowns, emergency call-outs and unplanned capital spend come from.

This summer we surveyed the entire UK estate of a national retailer ahead of peak trading. The results are anonymised here, but the numbers are real, and they show how risk actually sits across a multi-site estate. They also challenged a few assumptions we would have made before we started.

The brief: every unit, every site, before peak trading

The client wanted to go into its busiest trading period knowing what it was relying on. Our engineers visited every site, logged every indoor and outdoor unit, and graded each one. For each unit we recorded the make, model, serial number, manufacture date, unit type, refrigerant and charge. Visits were scheduled around trading hours, and the survey was non-intrusive.

Each unit was graded from 1 to 5, with condition notes and any critical parts needed:

  • 1 – Poor
  • 2 – Below average
  • 3 – Average
  • 4 – Good
  • 5 – New

In total we surveyed 67 stores and sites in 51 days and inspected and graded 970 units. Our AC Health & Condition Survey is designed to run at this scale, anywhere in the UK.

What the survey found

The headline is reassuring: 82% of the estate was in average condition or better. The rest is where the money and the risk sit.

Grade Units
1 – Poor 107
2 – Below average 53
3 – Average 269
4 – Good 401
5 – New 130
Not graded 10
Total inspected 970

That left 160 units graded poor or below average. Eighty-three units were recommended for full replacement, spread across 13 sites.

The risk was concentrated, not spread evenly

The most useful finding was where the problem units were. Around 70% of them were at just nine of the 67 sites. Thirty sites had at least one poor or below-average unit, but 37 had none at all.

This matters because most estates are managed as if risk is spread evenly. Maintenance budgets, call-out expectations and replacement planning are often averaged across every site. In reality, a small number of locations were carrying most of the exposure, and a rolling programme that treated all 67 sites alike would have spent time and money in the wrong places.

Where each site ended up

After the survey, every site was given a status:

Site status Number of sites
Replacement required 13
Repairs or remedial actions 38
All OK 16

Sixteen sites needed nothing. Thirty-eight needed targeted repair or remedial work. Thirteen needed replacement. Without a survey, those 67 sites would all have looked much the same on a maintenance schedule.

From findings to a plan

A list of faults is not much use to a finance team. The client received an individual health check report for every site, an estate-wide summary with charts and a site-by-site register, and costed remedial quotes site by site. The findings were then turned into a prioritised plan:

  1. Now: urgent replacements, where failure before peak trading was the main concern.
  2. Next 12 months: budget for the at-risk equipment, so spend can be planned rather than reactive.
  3. Ongoing: flagged units monitored at planned maintenance visits.

The reports belong to the client and can be used with any contractor.

What this means for your estate

You do not need 67 sites for the same pattern to apply. The same logic holds for retail chains, distribution centres, office portfolios, leisure operators, hotel and restaurant groups, schools and academy trusts, and healthcare sites. A survey gives you:

  • Fewer surprises at peak. You know which units to deal with before the busy period, rather than discovering them during it and losing trading.
  • Planned budgets instead of reactive spend. Replacement is phased and costed, not triggered by a failure.
  • An accurate asset register. Make, model, serial number, refrigerant and charge are recorded for every unit.
  • Better F-Gas records. Knowing the refrigerant and charge in each system supports the record-keeping your compliance obligations require. See our compliance page for more.

A survey also makes ongoing servicing more effective, because your commercial air conditioning maintenance visits can focus on the units that were flagged.

Request a Survey Proposal

AKS Air Conditioning has more than 34 years’ experience, is a Daikin and Mitsubishi partner, and covers the whole UK from our base in Formby. If you want to know where the risk sits in your estate before it costs you trading time, we will scope a survey around your sites and your trading hours.

Call us on 01704 833 755 or request a survey proposal online. You can also read more about the AC Health & Condition Survey.

Scroll to Top